Frequently Asked Questions

Report Purpose

This report presents technical test results collected through the Spoofer testing system. All displayed data is provided for informational, research, and analytical purposes only.

The report reflects network behavior observed at specific timestamps and does not represent permanent, continuous, or guaranteed conditions.

Server & System Information

Displayed system details may include:

• Server type (VPS or Dedicated Server)
• IP address (partially masked for privacy)
• Country and datacenter location
• Operating system and distribution
• CPU, memory, and storage specifications
• Observed NIC speed (when detectable)
• Measured download and upload throughput
• Packet-per-second (PPS) performance

These values are environment-dependent and may vary due to network congestion, provider-side filtering, virtualization layers, hardware limits, or temporary routing rules.

Spoofing Status Interpretation

Spoofed: Yes

Indicates that during the test:

• Outbound packets with modified or non-origin source addresses were observed leaving the network
• No effective source validation (such as strict ingress filtering) was detected at that time

Spoofed: No

Indicates that during the test:

• Packets with invalid or modified source addresses were blocked, filtered, or dropped
• Source address validation or filtering appeared to be active

Multiple Test Entries Explained

The presence of multiple entries for the same provider, ASN, or IP range may reflect:

• Tests conducted at different dates and times
• Different IP allocations or routing paths
• Provider policy or infrastructure changes
• Temporary misconfigurations or maintenance windows

Because of this, mixed or changing results are possible and expected.

Performance Metrics Disclaimer

Metrics such as download speed, upload speed, and packet-per-second (PPS) values are:

• Not benchmarks
• Not service-level guarantees
• Not indicators of provider quality or intent

They represent raw observations during the test window only.

Provider & ASN Information

Provider names, AS numbers, and website references are included strictly to:

• Identify routing ownership at the time of testing
• Provide contextual transparency

Spoofer does not operate, manage, or control any listed provider, does not accuse providers of wrongdoing, and does not claim malicious intent.

No Warranty & No Endorsement

• All data is provided “as-is” without warranties of any kind
• Listings do not constitute endorsement, certification, or recommendation
• Results may become outdated or invalid without notice

Legal Responsibility

All testing results are provided strictly for:

• Educational purposes
• Network research
• Defensive security analysis

Users are solely responsible for legal compliance, provider terms of service, and all applicable laws and regulations in their jurisdiction.

Spoofer does not promote, encourage, or support illegal activity.

Earn Rewards by Testing Your Server

Run the Spoofer test on your server and earn rewards directly to your account wallet. Rewards are granted only for valid spoofing results.

How to Claim a Reward

1. Visit https://spoofer.network/download/
2. Download and execute the script on your server: ./spoofer
3. Copy the generated results URL
4. Go to https://spoofer.network/spoofer/
5. Click Claim Reward, paste the URL, and submit

Reward Amounts

• Same provider + same IP: $5 (once per month)
• Same provider + new IP: $10
• New provider: $5 up to $200
• Higher rewards depend on PPS, stability, and report quality
• Rewards are automatically added to your wallet balance

Important Rules

• Only one reward per IP per month is allowed
• Do not run multiple tests at the same time
• Avoid downloads, uploads, streaming, or heavy usage during testing
• Low PPS or inconsistent results may be replaced with N/A

About the Spoofer Script

The Spoofer script is a standalone testing tool. It does not inject backdoors, malware, miners, or hidden services into your server. The script only reads system and network information required to generate the test report.

Data Collected by the Script

• Server IP address
• Hostname
• Operating system distribution
• CPU usage
• Memory (RAM) usage
• Disk usage
• Network speed test results
• Packets per second (PPS)
• Spoofing capability check

No personal user data is collected. Full details are available in the Privacy Policy.

Security & Transparency

• You may scan the script using antivirus or online scanners (e.g. VirusTotal)
• Network packets can be monitored during execution
• Sent packets are visible in HEX format and not encrypted
• No hidden traffic or background processes are used

Session Not Found Error

If you see the message:

“Your session (generated code) was not found in the database. Please try again.”

This usually means the test did not complete correctly or IPv6 is enabled. Please disable IPv6 and run the script again.

Disable IPv6 (Required)

Open your terminal and edit the system configuration:

sudo nano /etc/sysctl.conf

Add the following lines:

net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1


Save and apply the changes:

sudo sysctl -p

Verify IPv6 Is Disabled (Optional):

cat /proc/sys/net/ipv6/conf/all/disable_ipv6

Output meaning:

• 1 = IPv6 is DISABLED (OK)
• 0 = IPv6 is ENABLED (NOT OK)

After that, execute the script again:

./spoofer

Payment Method

All payments are accepted exclusively via cryptocurrency. No other payment methods are supported.

Supported Cryptocurrencies

• The payment API supports up to 7 cryptocurrencies
• Available options depend on current wallet support
• USDT is NOT accepted (wallet not supported)

Additional Cryptocurrency Requests

If you want to use a different cryptocurrency, availability depends on wallet compatibility. You may contact via Telegram only: @blacklayer

Refund Policy

Before making any payment, you must read the refund policy:

https://spoofer.network/refund-policy/

Contact Method

Email support is disabled. The mail server was removed due to repeated abuse, spam, and direct attacks targeting the real server IP.

In over 6 years of operation, email received fewer than 5 legitimate messages, while exposing the server to unnecessary security risks.

Telegram Only

The only supported contact method is Telegram. All requests, questions, and communication must be sent via Telegram.

Telegram: @blacklayer

Subscribe to Notifications

You can receive notifications directly in your web browser, mobile device, or app. Notifications are supported on all operating systems.

How to Enable Notifications

1. Open the website in your browser
2. Click the lock or settings icon next to the address bar
3. Open Site settings
4. Set Notifications to Allow

If Notifications Do Not Appear

• You may have previously clicked Block
• Clear browser data: Cached images and files
• Select All time when clearing cache
• Refresh the page

After refreshing, you should see the notification permission popup again. Click Allow.

What Notifications You Will Receive

• New IP addresses added
• New providers
• Updates to spoofing status for the same IP address

No spam. No marketing. Only important updates.

Install as App (Recommended)

Install this website as an app for faster access and better usability. Works on Android, iOS, Windows, macOS, and Linux.

On Mobile Devices (Android / iOS)

1. Open the website in your browser (Chrome, Safari, Brave, Edge)
2. Tap the Share or Menu button
3. Select Add to Home Screen
4. Confirm the installation

On Desktop (Windows / macOS / Linux)

1. Open the website in Chrome, Edge, Brave, or Firefox
2. Click the three-dot menu in the top-right corner
3. Select Install App or Install Website
4. Confirm to create a desktop app

Why Install the App?

• Faster access than bookmarks or favorites
• No need to remember the domain name
• Opens in its own window like a native app
• Comfortable, direct, and distraction-free

This app uses your browser engine — no extra downloads, no App Store required.